Our Products
Nickel Alloy 201 Flanges
UNS N02201 Flange, DIN 2.4068 Flanges
We are Manufacturer, Supplier & Exporter of Nickel Alloy 201 (UNS No. N02200), 2.4060, 2.4066 Flanges. The Nickel Alloy 201 Flanges can be availed from us in various grades as per the specific requirements of the clients. Nickel Alloy 201 flanges offer excellent resistance to a wide range of corrosive media. Alloy 201 Flanges is an alloy similar to Alloy 200 Flanges, but with low carbon content, owing to which it is preferred in caustic soda. Nickel Alloy 201 Flanges has good resistance to corrosion in acids & alkalis and hence is extremely useful in under reducing conditions. The nickel alloy 201 Flanges is virtually immune to inter granular attack above 315°C. Nickel alloy is a silvery-white lustrous metal with a slight golden tinge that takes a high polish. Our product differentiation is based on the premier finish of Nickel 201 Flanges with minimum burr on the threads .
Mangalam Metal are a topmost supplier & exporter of precision high quality Nickel 201. These Flanges have high resistance to temperature, so that it can be used where there is constant exposure of High Temperature, Hot water, Chemical and Gas. These Nickel 201 Slip On Flanges occurs naturally in food and water and may be exacerbated by human contamination. Nickel-plated faucets, such as Nickel 201 Threaded Flanges, can contaminate water and soil; mining and smelting can deposit nickel into waste water; and nickel-steel alloy cookware and colored dishes can leach nickel into food.
Specification Chart of Nickel Alloy 201 Flanges
| Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Pressure Rating | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Most common types | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged, Heat treated and machined |
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Special design |
As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Manufacturer of |
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. B.S: BS4504 , BS3293, BS1560, BS10 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276 |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |